- 6 years ago
- Wedding: September 2012
Hi Bees here is my 1st DIY!
Things you will need: Letters (I purchased mine already gold from Hobby Lobby), Wood sign (from Michaels), ivory paint, lacquer, drill, glue, screws (optional)
1. Drill holes into wood to feed ribbon through
2. Paint wood sign ivory. I used 3 coats, then covered in 1 coat of lacquer to give it a shiny finish
3. The letters i purchased had holes in the back for screws- like if you were going to hang them on the wall. I decided to measure where the holes were and screw into the wood. I also used glue to secure them. Doing both was probably overkill- you should be find if you just use glue.
4. Feed small ribbon through the holes and hang!